CerMark LMM-6000 Black Laser Marking Coating Paste for Stainless Steel and Metals – Use with CO2 & Fiber Lasers – Permanent, High-Contrast Marks – Ideal for Industrial & DIY Use (250g)

CerMark LMM-6000 Laser Marking Coating is a high-performance black marking solution designed for use on stainless steel and other hard metal surfaces. This advanced laser marking paste produces permanent, high-contrast black marks when used with CO2 lasers (30W+) or fiber lasers (200 kHz+). Whether you're creating industrial ID tags or custom metal art, LMM-6000 ensures durable and legible results every time.Formulated with a thicker consistency to prevent settling, LMM-6000 may be thinned with ethanol, acetone, or MEK for optimal application. It's most effective when applied evenly using an airbrush or foam brush. Avoid using isopropyl alcohol, as it negatively impacts performance.Note: LMM-6000 is not recommended for use on chrome, brass, copper, pewter, or coated/painted surfaces. For chrome and softer metals, use CerMark LMM-14 instead.For best results, clean the surface thoroughly, apply a thin, even coat, allow to dry completely (air dry ~2 min), and laser mark with tested speed and power settings. After marking, wash with warm water to remove residue and reveal the finished black mark.CerMark LMM-6000 Laser Marking Coating is a high-performance black marking solution designed for use on stainless steel and other hard metal surfaces. This advanced laser marking paste produces permanent, high-contrast black marks when used with CO2 lasers (30W+) or fiber lasers (200 kHz+). Whether you're creating industrial ID tags or custom metal art, LMM-6000 ensures durable and legible results every time.Formulated with a thicker consistency to prevent settling, LMM-6000 may be thinned with ethanol, acetone, or MEK for optimal application. It's most effective when applied evenly using an airbrush or foam brush. Avoid using isopropyl alcohol, as it negatively impacts performance.Note: LMM-6000 is not recommended for use on chrome, brass, copper, pewter, or coated/painted surfaces. For chrome and softer metals, use CerMark LMM-14 instead.For best results, clean the surface thoroughly, apply a thin, even coat, allow to dry completely (air dry ~2 min), and laser mark with tested speed and power settings. After marking, wash with warm water to remove residue and reveal the finished black mark. CerMark Metal Marking Solution creates solid black engraving on uncoated metals. The solution is brushed on to clean metal and then laser engraved. After engraving, wash the area with water to remove the unused solution. The product is shipped as a concentrate and requires thinning with denatured alcohol. The 100 grams of solution will cover an estimated 1000+ square inches when applied using a brush and an estimated 2000+ square inches when applied using the spray method. Coverage (When mixing with denatured alcohol): Brushing 1:1 - 1000 square inches, Spraying 2:1 - 2000 square inches. The 250 grams of solution will cover an estimated 2500+ square inches when applied using a brush and an estimated 5000+ square inches when applied using the spray method. Coverage (When mixing with denatured alcohol): Brushing 1:1 - 2500 square inches, Spraying 2:1 - 5000 square inches.

• 𝗣𝗿𝗼𝗳𝗲𝘀𝘀𝗶𝗼𝗻𝗮𝗹-𝗚𝗿𝗮𝗱𝗲 𝗟𝗮𝘀𝗲𝗿 𝗠𝗮𝗿𝗸𝗶𝗻𝗴 𝗣𝗮𝘀𝘁𝗲: Achieve durable, permanent black marks on stainless steel and other hard metals using CO₂ (30W+) or fiber lasers (200 kHz+); ideal for industrial, commercial, and maker applications.
• 𝗖𝘂𝘀𝘁𝗼𝗺𝗶𝘇𝗮𝗯𝗹𝗲 𝗖𝗼𝗻𝘀𝗶𝘀𝘁𝗲𝗻𝗰𝘆 𝗳𝗼𝗿 𝗕𝗲𝘀𝘁 𝗥𝗲𝘀𝘂𝗹𝘁𝘀: Thick formula prevents settling; can be thinned using ethanol, acetone, or MEK for spray or brush application. (Avoid isopropyl alcohol.)
• 𝗘𝗮𝘀𝘆 𝗔𝗽𝗽𝗹𝗶𝗰𝗮𝘁𝗶𝗼𝗻 𝗠𝗲𝘁𝗵𝗼𝗱𝘀: Apply evenly with an airbrush or foam brush. Even coverage is key: too thin results in weak marks, too thick requires more power. Dries quickly in under 2 minutes.
• 𝗡𝗼𝘁 𝗳𝗼𝗿 𝗦𝗼𝗳𝘁 𝗠𝗲𝘁𝗮𝗹𝘀 𝗼𝗿 𝗖𝗼𝗮𝘁𝗲𝗱 𝗦𝘂𝗿𝗳𝗮𝗰𝗲𝘀: Do not use on brass, copper, pewter, chrome, painted or coated metals. For chrome and softer metals, choose CerMark LMM-14.
• 𝗖𝗹𝗲𝗮𝗻, 𝗦𝗵𝗮𝗿𝗽 𝗥𝗲𝘀𝘂𝗹𝘁𝘀 𝗧𝗵𝗮𝘁 𝗟𝗮𝘀𝘁: After laser marking, rinse with warm water to reveal crisp, high-contrast, chemical- and abrasion-resistant marks that stand up to industrial wear.